Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
*Product may vary by application
Emissions Compliance Declaration: QUALIFIED MANUFACTURER DECLARED "MODIFIED PART"
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
Description
*Do not use rear stand bracket with this exhaust system.
Power | +10.2% / 9,400rpm |
Torque | +10.2% / 9,400rpm |
Weight | -5.6kg |
Main Material | Stainless steel |
Static Noise Decibel : dB/ Measured at : rpm |
117dB/4,250rpm : without dB killer |
100dB/4,250rpm : with dB killer |
Test result by Z900RS Japan Spec
- Traditional style 4-1 exhaust system. Similar way of producing procedure from '80s
*High heat resistant paint coating is applied. Paint peeling problem is not under warranty. - Vintage style sand casting exhaust flange with Stainless steel connector
- Lambda sensor boss
- x1 for OEM sensor
- x1 for FI tool
- This full system is possible to remove dB-killer.
CAUTION !
Check exhaust gas and confirm Air by Fuel ratio is within safe area. It is highly recommended to adjust FI mapping when running without dB-killer.
Check exhaust gas and confirm Air by Fuel ratio is within safe area. It is highly recommended to adjust FI mapping when running without dB-killer.