*Product may vary by application
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
Description
Our legendary Fender Eliminator Kit with its smart use of the stock key portal makes access for your key to pop your seat uncompromisingly easy.
This new kit incorporates our new Shrink Solder Connectors and our new and improved weather tight light housing, and brighter DOT compliant LED light.
Proudly made in the USA!
- New improved D.O.T. compliant L.E.D. light and housing
- New easy to use Heat Shrink Solder Sleeve Butt Connectors
- Designed for USA Spec License plates measuring 4" x 7"
- 5-3/4" horizontal hole spacing and 2-3/4" vertical hole spacing
- Model specific precision laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle
- Black anodized aluminum license plate frame with silk screened Yoshimura logo included
- Compatible with aftermarket turn signals when combined with Universal Turn Signal Standard Bracket Kit or Corner Mount Bracket Kit (sold separately)
. . . . .
This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product.
Attention international customers: This product was designed and tested to be compatible with vehicles in the U.S. marketplace only. Compatibility, including fitment and performance, may vary by marketplace.
Instructions
Instructions / What's Included PDFVehicle Fitment
Customer Reviews
Install wasn’t complicated and the parts are high quality. Might have to get the Yoshi exhaust now 🤓
I purchased the tale tidy kit, with the oem turn signal brackets, for my '23 MT09. It fit great. It looks great. It was easy to install. Some reviews complained about the difficulty of removing/reinstalling the oem flang and spring and those individuals should take their bikes to a shop because it was a very simple task. Also, the turn signal brackets kept my oem turn signal width legal in CA. Overall, I'm happy with my purchase.
3-Star Review for the Yoshimura Fender Eliminator
I've fitted this kit onto my 2022 MT09 SP. While it’s robust and complements the bike well, there are specific issues you might want to be aware of:
Instructions: The provided instructions were not too detailed. Instead, I found an installation video on YouTube by Full Throttle Freedom very helpful. The trickiest part was managing the stock seat cover spring and fitting it into the Yoshi kit. It's a challenging task, demanding a lot of patience and feels like you need an extra hand. It would have been great if Yoshimura provided a pre-assembled key cover.
License Plate Fitment: The license plate is a stressed member of the turn signal assembly. Changing or fitting the plate requires undoing the whole plate frame and turn signal assembly. The spacing underneath the license plate was too tight for a Colorado motorcycle plate. As a result, it doesn't sit perfectly flat and might rattle unless you tighten it to the point of slightly deforming the plate.
Value & Fitment: This kit could easily be rated 5 stars if it was priced more affordably or offered a better fit and a license plate cover.
On the bright side, its design is appealing. It's sturdy and practical. The installation frustrations will likely fade in a few days, especially once I'm out enjoying the ride.
I live in the US. This fender eliminator would have been installed on my 2021 Yamaha MT-09. First, for over $200 including tax this product should include a key hole cover already in place (or a lower price because of the difficulty transferring the stock parts). Additionally, based on the other two reviews I read, bolts not aligning properly does not fill me with confidence that this product has been properly R&D'd for my bike. Finally, having to drill anything on what is supposed to be a direct bolt on product is complete deal breaker. This is unfortunate because I have become a big Yoshi fan and have used their products (fender eliminators, exhaust systems and cosmetic parts on a number of bikes for years. Hopefully their web site is advanced enough to handle adding a comment or feedback to this review so we can better understand and trust this product.
Sorry to hear about your frustration. There should be no modification to our brackets necessary when installing this kit. Please call our customer service line so we can help you with your problem at 800-634-9166.
Bought this part as the stock license plate holder was too far out for my taste. It was very easy to put together and install on my bike - instructions were clear, all the parts fit and it was and easy trade.
I do agree with Montana Craig's comment that the kit should have come with a seat key lock cover. It was annoying to install. I also found that the holes on my Canadian license plate do not align with the holes on the kit - so had to drill the license plate and loose the plastic protection cover... But the end result is so worth it! The silhouette of the bike is much nicer from the side and from the rear. It is a great upgrade to my MT-09SP!
... Next project is to get the turn light brackets so I can swap the turn signals with something that has a "larger presence" and brighter than the single LED - both front and back ...